1.[Fix Problems]If your washing machine has the following problems:1.Water leakage after closing;2.Unable to fill hot/cold water;3. Poor water flow;4.Washing at wrong water temperature Please replace the valve in time to ensure stable water supply and restore the washing machine's optimal performance. 2.[Functional Specifications]W11165546 water inlet valve has 3 Push-On Valves, 2 Threaded Valves(ports that are connected to hot and cold water), 4 Solenoids;Each port is controlled by a solenoid valve that sends out electricity to turn the hot and cold water flow on and off according to the wash temperature setting and the signal from the water level switch. 3.[ And ]W11096267 inlet valve is made of high quality metal and ABS plastic for durability and excellent sealing.No easy leakage.Assure operation and long life.120 volts 60 HZ.Fixes error codes: LF, F8, E1, FL, and LO. 4.[]1.Always disconnect the power and water supply before installation.2.Drain water after shut off. 3.Remove tip back of panel. 4.Pry up and off top section off washer. 5. Remove screw that holds valve body. 6.Unhook wiring harness.7.Replace with valve and reverse procedures.