XY-TR01 Automatic Constant Temperature and Humidity Control Panel for Temperature and Humidity Control Module

₺1.249,00
ÜCRETSİZ Kargo

XY-TR01 Automatic Constant Temperature and Humidity Control Panel for Temperature and Humidity Control Module

  • Marka: Unbranded

XY-TR01 Automatic Constant Temperature and Humidity Control Panel for Temperature and Humidity Control Module

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺1.799,00
Fiyat: ₺1.249,00
Kazancınız: ₺550,00 (30%)
Satıcı:
₺1.249,00
ÜCRETSİZ Kargo

Stokta var

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

1. Automatic identification of working mode: The system automatically recognizes the working mode according to the start temperature or stop temperature Start temperature stop temperature, cooling mode 'C' start temperature Less than stop temperature, heating mode 'H' 2. Cooling mode: When the detected temperature is or equal to the starting temperature, the relay is turned on, the red indicator light is on, and the refrigeration equipment starts to work When the detected temperature is less than or equal to the stop temperature, the relay is turned off, the red indicator light is off, and the refrigeration equipment stops working 3. Heating mode: When the detected temperature is less than or equal to the starting temperature, the relay is turned on, the red indicator light is on, and the heating equipment starts to work When the detected temperature the stop temperature, the relay is turned off, the red indicator light is off, and the heating equipment stops working 4. Temperature correction function OFE (-10.0 - 10.0): When the system works for a long time, there may be deviations, which can be corrected by this function, the actual temperature = measured temperature and calibration value How to set start or stop temperature: 1. In the running interface, press and hold the 'TMand' button for more than 3 seconds to enter the startup temperature setting interface. You can use the TMand TM- button to modify the parameters in the test. After the parameters are modified, wait for 6s to automatically exit and save 2. In the running interface, press and hold the 'TM-' button for more than 3 seconds to enter the stop temperature setting interface. You can modify the parameters through the TMand TM- button. After the parameters are modified, wait for 6s to automatically exit and save Material: ABS colour:As shown Package Contents: 1 x Temperature humidity module Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.
  • Fruugo Kimliği: 403757232-857122754
  • EAN: 8554822035433

Teslimat ve İade

2 gün içinde kargoya verilir

  • STANDARD: ÜCRETSİZ - Arasında teslimat Per 16 Ekim 2025–Per 23 Ekim 2025 - ÜCRETSİZ

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei City, Anhui Province, Shushan District, Anhui Province, No. 15, South Seventh Street, South Cooperative South Road, Chemical Machinery Community, Building 1, Unit 2, 603
  • Hefei
  • CN
  • 523011
  • nacufalacan81@hotmail.com
  • 13243801962

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901