[Compact XLR Soldering Plug]Gold plated 3Pin XLR Microphone Cable plug adapter. Half the size of a typical XLR plug, compact and small enough to meet your connection needs in tight spaces. [Repair/DIY XLR Cable]Compact 3Pin XLR Adjustable Right Angle Audio solder plug. Great for quick fixes or DIY microphone XLR cables. [Thin XLR Cable Connector]Compact XLR microphone solder connector. Suitable for XLR/Microphone thin cables less than 5mm (0.19in) in diameter. [Angle Adjustable]90 degree right angle XLR Microphone Solder audio plug.Simply loosen the set screw to adjust the cable to your desired corner direction. This plug adopts a side outlet design, and after assembly, it can also be adjusted at a small angle by rotating the tail parts. It is very suitable for devices with small socket space on the back. The diameter of the tail rubber sleeve is 3mm, which can be used for 3.0-5.0mm wires. When the rubber sleeve is removed, the diameter is 7mm and can be used for 5.0-6.5mm wires. Product use: Suitable for making xlr microphone cables, DMX cables. Microphone cables, etc. This model requires Installation precautions: Since this plug uses side outlet, you need to hold the tail plastic part and rotate it counterclockwise to remove the tail cover before tightening the plastic back shell. After tightening the plastic shell, determine the angle and press the tail cover tightly. When assembling, be sure to remove it first, then modify it, and then tighten the shell. If you do not remove the tail cover and tighten it directly, the wire will rotate multiple times while the plug is fixed, which may cause the wire to be twisted off or the welding part to fall off. specifications: Male Material: Zinc copper gold plating+plastic colour: Black+silver Package Contents: 2 x XLR Soldering Plug Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.