Features: _x000D_ Designed for test the wire circuit state of network cable, telephone cable, such as open, short, cross, etc _x000D_ High quality network cable tester suitable for testing both RJ45 Ethernet cables and RJ11 cables. _x000D_ This model adopt automatic scan model, which can rapidly get a test result _x000D_ The tester has a detachable section making it perfect for testing cable runs in different locations. _x000D_ RJ45 network cable tester tests double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground _x000D_ With this network cable tester, you can judge wrong connection, short circuit and open circuit. _x000D_ Compact and light weight network cable tester, useful for home and outside use. _x000D_ _x000D_ _x000D_ Specification: _x000D_ Model: WZ-468_x000D_ _x000D_ Detected Cable type: RJ11,RJ45 _x000D_ Power supply: 9V laminated battery(Not included) _x000D_ Size: 9.7*10.3*2.8cm/3.8*4.1*1.1in _x000D_ Weight: Approx.116g/4.1oz _x000D_ _x000D_ _x000D_ Instructions: _x000D_ 1. Testing double twisted cables 1,2,3,4,5,6,7,8 and G corresponding ,and tell users which exact line is on wrong circuit _x000D_ 2. Switch ON is the normal test speed, "S" is the rapid test speed, and OFF is Turn off the Tester _x000D_ 3.turn on the tester ,insert the line connector into main tester and remote control .Then the indication lights(1 to 8 and G) will flash _x000D_ Main tester: 1-2-3-4-5-6-7-8-G _x000D_ Remote control tester:1-2-3-4-5-6-7-8-GRJ45 _x000D_ 1-2-3-4-5-6------ RJ12 _x000D_ 1-2-3-4---------- RJ11) _x000D_ If the connection is not normal, it will be displayed as follows: _x000D_ 1.When there is a network cable such as NO. 3 cable is open circuit, the main tester and remote test end NO.3 lights is not on. _x000D_ 2.When several cables are open circuit, several cables are not on. When less than two cables are connected, the lights are not on. _x000D_ 3.When the two ends of network cables are in disorder, for example, cable 2 and 4 are in disorder, it is shown as follows: _x000D_ Main tester unchanged: 1-2-3-4-5-6-7-8-G _x000D_ Remote tester: 1-4-3-2-5-6-7-8-G _x000D_ 4. When there are two wires short circuits , the main tester does not light up, while the remote test end shows that both of the two line lights of short circuit are dim. If there are more than 3 (including 3) short circuits, all the lights of several wires Numbers of short circuit will not light up _x000D_ _x000D_ _x000D_ Package list: _x000D_ 1 x Network Cable Tester (battery not included)