Features: 1. Convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal. The maximum PWM signal frequency is 20KHZ within the range of 2KHZ-20KHZ. The factory default is 2KHZ. The default function is a 2KHZ PWM signal of 0-10V to 0-100%. The customer can adjust the potentiometer on the board to set the corresponding output frequency according to the demand. 2. PWM signal and voltage can be output in direct ratio or inverse ratio (. positive phase output or inverse phase output). There are two kinds of PWM signals. PNP-PWM output and NPN-PWM output respectively. PNP-PWM output can only be 5V level, NPN-PWM output can be 5V and 24V level. 3.When NPN-PWM signal is output, it supports common cathode connection and common anode connection, with two levels of 5V and 24V. When 24V is output, 24V is required for power supply When PNP-PWM is output, the level can only be 5V. It can only be connected with common cathode, and connected to MCU, etc. 4. The output PWM signal frequency is adjustable from 2KHZ-20KHZ. There are 11 gears, corresponding to 2KHZ, 4KHZ, 6KHZ and 8KHZ respectively. The maximum frequency is 20KHZ. The default frequency is 2KHZ 5. Module input power 7-30V The current is 200MA. The recommended power supply is 15-30VDC. When outputting 24V PWM signal, the power supply needs 24VDC power supply. An external potentiometer interface is reserved. PWM output can be set by accessing potentiometer Specifications: Product name: Voltage to PWM signal module Model: V-PWM Type: motor control Dimension: 45 x 47 x 18MM (including parts) 2, Application: 1. It is used for PWM motor speed regulating interface circuit. 2. Used for instrument AD interface conversion. 3. Other signal processing interfaces where voltage is converted to PWM signal Material: PCB colour: green Package Contents: 1 x Voltage to PWM signal module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.