UV Toothbrush Cleaner Wall Mounted Toothbrush Holder Electric Toothbrush Cleaner Storage Case

1、The cover is made of anti-UV material to prevent ultraviolet radiation. And with a safe magnetic switch design, easy to operate. 2、 Detachable toothbrush holder design, easy to install and clean. 3、 The UV lamp is a long-life lamp, no need to replace. 4、 Two toothbrushes can be placed in the product for cleaning at the same time.  5、 The product is light and compact, easy to carry out. Battery: Use 2 AAA batteries (Not included) Working voltage: DC3V0.2A Working current: 170-220MA Net consumption: less than 0.4MA Power: 0.51-0.66W Battery life: 25 days (alkaline battery, 2 times a day) Working environment: 0-50 °C 1 x UV Toothbrush Holder Tips: 1. When attaching the adhesive, first wipe the wall with a towel. Dry or dry the wall and attach the cleaner back cover. 2. It is best to put the toothbrush into the card slot of the cleaner without dripping. 3. When using for the first time or when not using for a long time, it may be necessary to open and close the cover several times to start the lamp or wait a few seconds for the UV lamp to light up. 4. This product is not washable and avoids impact. 5. Use a dry soft cloth to clean. Product Instructions: 1. Remove the battery cover, install two 7th batteries, and then cover the battery cover. 2. After the battery cover is good, wipe the appropriate position on the wall above the bathroom wash basin, press the hanging board with the adhesive paper firmly on the wall, and then hang the cleaner on the attached hook. 3. After the product is installed, put the non-drip toothbrush into the slot of the cleaner, align the bristles with the UV lamp, and then close the cover. The product will start automatically and start the cleaning process. 4. When the UV light is on, it indicates that the product is working. 5. The product will automatically shut down after about 3 minutes of work, and the cleaning of the toothbrush will be completed. The toothbrush can be used with confidence.