The 26P of this adapter card is a 1.0MM pitch drawer-type top connection, and the 34P is a 2.54MM pitch female socket.<br> This card can be used to convert the 26P 1.0MM interface floppy drive to a 34P ordinary 1.44MB floppy drive or simulated floppy drive. It can be used normally after testing.<br> Easy data transfer between your computer and floppy<br> System:support winxp, winme, win7 32bit, win7 64bit, win10<br> Please Note:<br> this cable will NOT improve the read/write speed of floppy<br> For 1.44mb Floppy Only.Reliable and efficient<br> When wiring, connect according to sequence markings of each interface. If the connection is wrong, it will not be used.<br> If the 1# of the 1.0MM FFC/FPC 26P soft cable of the device/computer does not match the 1# of the adapter card, it means that the 26P soft cable is wrong and needs to be replaced. There are two types: the same direction cable and the reverse direction cable.<br> Regarding whether the soft cable matches, you can compare it with the 26P interface in the picture. The actual picture is a 1.0<br> MM 26P drawer-type top connection.<br> The silk screen on the board is different due to different batches<br> Colour:Green<br> Material:PCB+Plastic<br> Package Contents:<br> 1 x 26P to 34P Converter<br> 1 x cable<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.