Key benefits - Fast, reliable remote copying in about 2 seconds when three conditions are met: the original remote works normally; the transmission frequency is clear; and the remote coding IC is one of the supported types (PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240, etc). - Clear, repeatable copying process with LED indicators for easy operation and verification. - Built-in clearing and recovery functions to manage remote codes safely and conveniently. - Small size and light weight with a practical 50 meter operating range for versatile use. What the device does - Supports copying and cloning remote controls that use common coding ICs such as PT2262, PT2264, SC2262, SC2260, HS2262, 2260, LX2262, EV1527, PT2240, and similar technologies. - After successful copy, the copy remote can operate the original’s functions in tandem with the original device, enabling a spare or shared remote for convenience. - Includes a clearing function to erase codes from the copy remote when needed, and a recovery function to restore codes if cleared by mistake. How to use - Copy setup - Ensure three conditions are met: the original remote works; its transmission frequency is cleared; and the remote uses a supported coding IC. - Place the original remote and the copy remote side by side on a flat surface. - On the copy remote, press and hold the right arrow key (on the right side of the device) to enter copy mode. - When the copy mode is active, quickly press the corresponding button on the original remote with your left hand. - If the copy remote’s LED flashes rapidly, the copy is successful. For multiple keys, repeat the same method. - Clearing a code - Simultaneously press the two buttons on the copy remote (must be pressed at the same time). - Hold until the LED lights up, then goes out, and continues flashing. The flashing confirms that the code has been cleared. - After clearing, press any button on a remote to confirm the clear action (the LED on the copy remote will turn on and off). - Restoring a cleared code (recovery) - If a code was cleared accidentally and needs restoration, press and hold the two buttons on the copy remote at the same time. - Continue holding until the LED lights turn on and off and then keep flashing, indicating the recovery has been successful. Specifications and practical attributes - Size and weight: small size and light weight for easy handling and storage. - Range: remote control operation up to 50 meters. - Compatibility: supports a wide range of coding ICs including PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 EV1527 PT2240 and other similar ICs. - Functionality: quick 2-second configuration under the specified conditions; reliable single-key and multi-key copying; distinct clearing and recovery operations. Use scenarios - Duplicate a garage or gate remote to keep a spare on hand, reducing the risk of being locked out. - Copy a remote used for office or building access control, enabling shared use without giving out the original key. - Create a backup remote for a vehicle or equipment that relies on common encoding ICs, improving convenience for family members or coworkers. Notes on operation and reliability - Copy quality depends on meeting the three initial conditions and using a compatible coding IC. - LED indicators provide clear feedback for entering copy mode, successful copying, clearing, and recovery. - The device is designed to offer a practical solution for duplicating, clearing, and recovering remote codes with compatibility across common remote technologies. This description preserves the original product capabilities, supported ICs, procedures, and performance characteristics while presenting them in a clear, concise, customer-friendly format.