Universal Car Alarm System Engine Push Button Start Stop Lock Anti theft Protection Features:Sound and light alarm, emergency alarm function.Super lock induction function, no induction will not be able to start the vehicle.High quality ignition wire, delicate and durable, ensure the stability of automotive electrical power supply.Detachable induction coil, easy installation, convenient for repair and maintenance, it is recommended to install under the steering wheel.Coil mould forming, strong and durable, passive lD sensor card, no battery, perfect matching, safe and reliable anti-theft function.Specification:Condition: 100% NewStandby current: 8mA (note: standby for up to 2 months continuously)Key display: blue light (car turn off: no light; car start: long time light; car stereo turn on: flashing light)Package Box Size: 17 x 14.5 x 5cm / 6.7 x 5.7 x 2in Package List:1 x Induction Coil1 x Wiring Harness1 x Main Unit1 x Start Button2 x ID CardInstallation Note:2. When the original vehicle has an anti-theft chip, take out the anti-theft chip of the original vehicle and stick it to the area where the original vehicle can be scanned, otherwise it may lead to the start-up failure.3, Because the base of the start button is metal material, when pasting and putting, if interference with the original car's anti-theft chip, then choose other areas to put or pad high processing.4. The output of this product is made of 5 lines, i. e., 12V red wire connection original fire line, ACC line of orange wire connection original car (usually in 1 gear), ON1 power line of white wire connection original car (usually in 2 gear), starting point fire line of yellow wire connection original car (this line is powered at the start moment, no power after start-up), brown wire connection of the original car ON2 power supply line (this line when the key hit ON gear when there is electricity, and in the start of the moment no electricity, when start-up, there is electricity, installation should be careful to judge).5. When there are only 4 output wiring for some models, only orange (ACC), white (ON), yellow (ignition starting line, red line (fire line at the key head of the original car), brown line is not used or used with white ON1 line.6. When you meet a number of vehicles with 6 output wiring, in addition to following the way of the fourth item above, but also find out the function of the sixth line, the way is to play the key in ACC file, ON file, start file, In these three different states to detect the power supply of the sixth line, so that the sixth line in the start-up need power supply, and yellow start-up line phase connected or used relay isolation, in the case of power supply at ON, and connect the white line or use relay isolation power supply, keep in mind, otherwise it will be difficult to start the situation.7. In contrast to the starting part of the whole machine (with a key start and no key access function), it is important to remember that the ground wire must be connected firmly and the ground wire cannot be connected long, otherwise it will be difficult to start or the starting indicator light will be extinguished with one foot brake. All because the ground line is loose or the connection iron bad result.