Ultra Low Dropout 100A High Current Ideal Diode No Ground No Forward Voltage Limit Anti Backflooding

Feature Highlights: 1. Simple Series Connection: Just connect it in series with the positive wire of your circuit. No negative/ground connection is needed. 2. Wide Input Voltage Range: No upper limit on input voltage (as long as reverse voltage stays under 40V). 3. High-Power Handling: Built with 4x 320A high-current MOS tubes, supporting continuous current up to 80A-100A. 4. Super Efficient, Low Heat: An ultra-low 0.9mΩ conduction resistance means a tiny voltage drop of only about 0.004V, minimizing power loss and heat generation. 5. Lightning-Fast Reverse Protection: Reacts in under 2 microseconds! It acts like a diode, blocking reverse current instantly. If output voltage exceeds input, it shuts down in milliseconds. Important Notes: 1. Reverse Voltage is Key: While input voltage has no limit, the reverse voltage (output voltage minus input voltage) must NOT exceed 40V. Example: With a 24V input, you can connect output to a 12V, 24V, 36V, 48V, or 60V battery. A 72V battery is not allowed (72V - 24V = 48V > 40V). If the input is disconnected (0V), the output must be connected to a voltage below 40V. 2. For Anti-Backflow Use: Always disconnect the output load first when powering down the system. 3. Voltage Fluctuation: Since it's not grounded, the output voltage may have a slight fluctuation (approx. 0.3V). It is not recommended for precision voltage-sensitive applications. Product Details: This ultra-low dropout, high-current ideal diode module provides robust anti-backflow protection without the need for a ground connection. It features a near-zero forward voltage limit, ensuring minimal power loss and heat. Perfect for safeguarding circuits in high-current setups like solar charging, battery backups, and power distribution. Specifications: Model: B (with terminals) Color: Red Main Material: PCB Package Contents: 1 x Anti-backflow Charging Module (Only the item listed above is included. Other products are not included.) Please Note: Slight color differences may occur due to monitor settings. Allowable measurement tolerance is +/- 1-3cm.