["Description:\nTPA3255 Four-channel digital Class D amplifier board\nTPA3255 is a high-performance Class D power amplifier, which has Class D efficiency and can bring true high-end sound quality. There is an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath ™ Ultra high definition). This technology allows the device to maintain ultra-low distortion throughout the entire sound frequency band while exhibiting perfect sound quality. Working in AD mode, when THD is 10%, it can drive up to two 315W / 4R loads and two 150W (unclipped power) / 8R loads, and has a 2 VRMS analog input interface to support high-performance DAC (such as TI's PCM5242) seamless connection. In addition to excellent sound performance, the TPA3255 also has the advantages of high power efficiency and ultra-low power level idle loss (less than 2.5W). This can be achieved by 85mR MOSFET and optimized gate driver scheme.\nbrand new and high quality\nFeatures: \n1. Adopt original imported TPA3255 chip\n2. The main filter electrolytic capacitor adopts a capacity of 470UF / 50V * 4, which ensures a strong source of continuous power support.\n3. The resistor uses high-precision chip resistors to ensure a good signal-to-noise ratio.\n4. Adopt special inductance for sound to ensure the sound is crisp and powerful.\n5. PCB adopts 1.6mm thick double-sided board, 2.0 ounce copper thickness, and full tin-spraying process to ensure good passing performance of large and small currents. First-class PCB quality.\nAmplifier Board only,other accessories demo in the picture is not included.\n\nSpecification:\nWorking method: Class D\nQuiescent current: 150mA\nWork efficiency: > 90%\nOutput Power:\n315W / 4Ω, distortion 10% * 4\n185W / 8Ω, distortion 10% * 4\n260W / 4Ω, distortion 1% * 4\n150W / 8Ω, distortion 1% * 4\nFrequency response: 20Hz to 20KHz\nDynamic range: > 100 dB\nSignal to noise ratio: (SNR)> 111dB\nWorking voltage: DC24-48V switching power supply (for DC) (It is recommended to use DC36V switching power supply. If the temperature of the radiator of the power amplifier board with DC48V power supply will be higher, you need to increase the fan cooling)\nMaterial: Metal\nSize: app.10.8x9.4x3cm/4.25x3.70x1.18in\nColor: As the pictures shown\nQuantity: 1 Pc\n\nNote:\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Contents:\n1 x Amplifier Board"]