Introduction: Temperature and Pressure Safety Valves (T/P Valves) 0.7 MPa = 102 PSI Detailed introduction: Temperature and pressure relief valves (T/P valves) are suitable for various water heaters, including solar water heaters, electric water heaters, heat pump water heaters, and boilers. The T/P valve automatically releases excess temperature and pressure, providing dual safety protection. It serves as a critical safety component for pressurized water heating systems. Features: Safety relief valves are commonly used to control pressure in heating system boilers, domestic hot water storage tanks, and general water systems. When the system reaches the preset pressure, the valve opens and safely vents to the atmosphere, preventing overpressure conditions that could damage system components. Calibration pressure options: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Pressure deviation: 0.015 MPa for pressures up to 0.5 MPa; 3% of rated pressure for pressures above 0.5 MPa Technical specifications: Color: Gold Material: - Body: 3/4 inch brass - Control spindle: Brass - Sealing gasket: Silicone gel - Spring: SUS304 stainless steel Nominal pressure: PN10 Temperature range: 5110 C Set pressure options: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Set pressure deviation: -10% to +5% of set pressure Set temperature: 99 4 C Inlet and outlet (middle): BSPP 3/4" x 3/4" Weight: 238 g Dimensions: 83 x 42 mm Package included: 1 x Pressure Valve Note: Other items not included Note: Slight color variation may occur due to lighting and screen display differences. Measurement error allowance: 13 cm.