Dimensions: Inner diameter: 36,8 mm or 1,45 inch Outside diameter: 92mm or 3.62 inch Pole Thickness: 26,8 mm or 1,05 inch Pole Width: 11mm or 0.43 inch Other Specifications: Number of Wires: 5 Number of Pins: 5 Number of Plugins: 2 Number of Mounting Holes: 3 Number of poles: 18 PART NUMBER: 22B-H1410-00-00 3C1-H1410-11-00 Equipment: Fits Yamaha MT125 MT-125 2015-2016) Fits Yamaha MT125 MT-125 ABS 2015-2019) Fits Yamaha WR125 WR125R 2009-2014) Fits Yamaha WR125 WR125X 2009-2014) Fits Yamaha YZF R125 YZF-R 125 2014-2016) Fits Yamaha YZF-R125 ABS 2015-2018) Fits Yamaha YZF R15 2011-2014) Fits Yamaha YZF R15 SP 2014) Fits Yamaha FZ150 Perfect gift for newborn parents, newborn mother, newborn father, baby shower, birthday, Christmas, festival and so on. Direct replacement for the original device! Plug-and-play, direct fit, easy installation. Highest quality laminating materials. Copper windings of the highest quality, resistant to 200 degrees Celsius. Pulsar coil included. Connector included. All shipped products are tested. The package includes: 1x generator stator coil TO NOTICE: Before installing a new stator Check the output of the AC stator. Replace all burnt or corroded connectors on the stator and regulator or rectifier. Check and repair all melted wires. Use high-temperature dielectric grease on all joints Our stator may use a different wire color code than the original. All wires are installed in the correct order please do not change any wiring configuration. This stator is designed as a direct replacement for the plug and should be used as such. When screwing in the stator, always use a locking agent. If our stator contains a receiving coil, always make sure the air gap is correct during installation. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.