Product category: Adhesive hook Material: Stainless steel Style: Simple hook Maximum load: 3 kg [High quality material]: The hook is made of 304 food grade 304 stainless steel, with tremendous treatment, and the surface has an anti-corrosion coating, which can withstand daily scratches and ensure its durability. Resistant to water and oil, no trace. [Modern design towel hook]: A base and a cylinder form a clothing hook, which allows it to support a certain weight. The simple and elegant towel hook can be perfectly combined with many modern style decorations. [Easy to install or disassemble]: No need to drill, strong adhesion and waterproof. Take off the adhesive protective layer and paste the hook on a smooth surface The installation only takes a few seconds. Simply heat the self-adhesive with a hairdryer to remove it. 4-room pantyhose hook, wall-mounted towel rack, stainless steel bathroom hook, waterproof waterproof and oil sticker hook for kitchen, living room and office [field application]: This hook is suitable for smooth surfaces such as glass, mirrors, tiles, metal surfaces, etc. It is very suitable for bedrooms, bathrooms, toilets, cupboards, kitchens and offices, etc. User instructions It is recommended to regularly clean the surface of the product with a mild water or detergent, then dry it with a soft towel. To keep the appearance brilliant and clean, do not use detergents based on salt and vinegar. Avoid that hard objects scratch the surface of the product, do not wipe with a rough cloth, it is recommended to use special maintenance wipes for cleaning. Do not come into contact with organic solutions and corrosive chemicals, and use it in a gaseous environment with the above substances, so as not to damage the surface coating and affect the brightness coating. This product is suitable for installation after completion of the decoration project to avoid the damage and corrosion of the product. The quality damage caused by the use of this product that does not comply with the above guidelines will be borne by the user. Installation steps: Clean and dry the wall, taking care not to leave dust, grease or wax on the surface. Before installation, please mark the desired location of the product on the wall. Apply glue to the metal area on the back of the product. Remove the protective film from the double-sided adhesive tape. Press the back against the labeled position for 3 to 5 seconds. Use a self-adhesive supplement without nails to secure the product. For best results, please wait 3 to 5 days before use. Note: Do not apply this product to whitewashed walls, covered with wallpaper, covered with lime or other soft or uneven surfaces.