3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V Get hot water fast with this 3500W electric water heater. Designed for quick and efficient heating, this stainless steel immersion heater operates at 220V and is suitable for various water containers. Features: Ideal for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water-filled containers. Ensure the water level is at least 25 to 30 cm to allow the heater to be fully submerged. The device will naturally float, and the power cord can be adjusted to position the heater correctly. If the water level is below 25 cm, ensure the heating element is fully submerged. The heater can be slightly tilted for proper immersion. For inflatable pools or bathtubs made of sensitive materials, place a ceramic tile under the heating pipe to prevent direct contact and potential damage. Fill the container with water, place the heater inside, and plug it in. Once the indicator light turns on and bubbles form around the heating element, the process begins. For large volumes of water, unplug the unit halfway through heating to check the temperature. When the desired temperature is reached, unplug the heater and wait 20 seconds before removing it from the water. Specifications: Type: Electric Water Heater Model Number: P20250110604 Power: 3500W Cable Length: 1.5m Voltage: 220V 50Hz Material: Stainless Steel + PP Plastic Safety Notes: Always ensure the metal heating tube is completely submerged in water during operation. Never use the heater outside of water. Unplug the device before touching the water. Do not allow human contact with water while the heater is powered. The stainless steel ball must be fully submerged during heating to prevent damage. Package Included: 1 x Immersion Heater (Adaptor included based on country of destination)