Smart Push Wireless Switch Light RF Remote Control AK-AC220-1X-MZ Receiver Wall Panel Button Ceiling Lamp Durable Part White

["Description:\nbrand new and high quality\nFeature:\nMultiple switches can be controlled by one remote control, or one switch can be controlled by multiple remote controls.\nThe output mode is switched by jumping, the jog, self-locking, and interlocking can be arbitrarily selected, easy to use, suitable for multiple uses in multiple fields\nMainly used in the fields of lamps, electric doors, for windows, lifting equipment, motor control, pumps, lifter control and security industry.\n\nSpecifications:\nProduct name: Single-channel 220v controller\nProduct model: AKAC220-1X-M2\nMaterial: ABS\nSize:4.5x1cm\nColor:Blue, red, white\nProduct frequency: 433MHZ\nWorking voltage: AC85-220AC\nWorking mode: jog, automatic, interlock\nWorking temperature: -40~+85℃\nReceiving sensitivity: -110dBm\nMaximum load: 1000w\nApplication areas: electric doors, for windows, lifting equipment, lifters and security industry, etc.\nQuantity: 1 PC\n\nProduct operation instructions:\nWorking mode switch\nThe output mode is set by \"Selecting the work mode plug\"\nSpecial reminder: You need to disconnect the power before switching the working mode\nA: Self-locking-connect the 1-2 position with a shorting cap (close to the inner side of the circuit board)\nB: Jog-the shorting cap is empty and not connected\nC: Interlock-connect the 2-3 position with a shorting cap (close to the outside position of the circuit board)\nMode description:\nJog mode: press the remote control relay to pull in, release the remote control relay to disconnect\nSelf-locking mode: press the remote control relay to close, press the remote control again to disconnect the relay\nInterlock mode: Press the remote control A button, the relay is closed, press the remote control B button to disconnect\n\nstudy method:\nPress the learning button once, the indicator light is on, and then press any button on the remote control, the indicator light flashes 4 times and the learning is successful.\n\nClear code operation:\nLong press the learning button for 4-8 seconds, and the LED flashes quickly to indicate that the code is cleared successfully.\n\nNote:\nNo retail package.\nTransition: 1cm=10mm=0.39inch\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Includes:\n1 x Remote Control\n1 x Switch Receiver"]