Rp2040 Board For With 0.42 Inch Lcd For /microprython

RP2040-0.42LCD is a high-performance Development board ,Integrated 0.42inch LCD (70x40 resolution).with flexible digital interfaces. It incorporates for 's RP2040 microcontroller chip.The RP2040 features a dual-core Arm Cortex-M0+ processor clocked at 133MHz with 264KB internal SRAM and 2MB internal flash .Inside the RP2040 is a 'permanent ROM' USB UF2 bootloader. What means is when you want to program new firmware, you can hold the BOOTSEL button while plugging it into USB (or pulling the RUN/Reset pin to ground) and it will appear as a USB disk drive you can drag the firmware onto.There is great C/C++ support, unofficial (but really good) for support, You can also for micropthon and for circuitpython.RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and 264 KB RAM2 MB SPI FLASH chip for storing files and for CircuitPython/for MicroPython code . No EEPROMFour 12 bit ADCs (one more than Pico)Two I2C, Two SPI and two UART peripheralsIntegrated 0.42inch LCDBoth Reset button and Bootloader select button for quick restarts (no unplugging-replugging to relaunch code)1x RGB(GPIO2)3.3V indicator LED3.3V regulator with 500mA current outputUSB Type C connector lets you access -in ROM USB bootloader and serial port debuggingSize & WeightSize: 23.5 x 18 mmWeight: 2.5gDOCUMENTShttps://github./01Space/RP2040-0.42LCDColour:PurpleMaterial:PCBPackage Contents:1 x RP2040 Development boardOnly the above package content, other products are not included.Note: Light reflection and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.