Rechargeable Handheld Positive and Negative Voltage 010V5V Current 0420Ma Signal Generator Set Analog Source Calibrator

₺2.199,00
ÜCRETSİZ Kargo

Rechargeable Handheld Positive and Negative Voltage 010V5V Current 0420Ma Signal Generator Set Analog Source Calibrator

  • Marka: Unbranded

Rechargeable Handheld Positive and Negative Voltage 010V5V Current 0420Ma Signal Generator Set Analog Source Calibrator

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺3.249,00
Fiyat: ₺2.199,00
Kazancınız: ₺1.050,00 (32%)
Satıcı:
₺2.199,00
ÜCRETSİZ Kargo

Stokta var

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

Version 2.04 Big Nixie tube display with encoder button adjustment Key benefits Precise current pulse control: two independent tuning modes let you adjust current in small, deliberate steps or in larger increments as needed. Flexible fine and coarse adjustments: fine tuning uses the last digit with a coefficient of 150, while coarse adjustment uses the penultimate digit with a coefficient of 1 50; each coefficient can be configured separately for fine control. Wide range with clear minimums and maximums: minimum per pulse is 0.01 mA, and the maximum coarse adjustment per pulse can reach 5.00 mA. Readable display and intuitive control: a Big Nixie tube display provides clear readouts, paired with an encoder button for straightforward adjustments. What it does Fine tuning mode: adds or subtracts 1 from the last digit (coefficient 150) to enable precise, smallstep changes. Coarse adjustment mode: adds or subtracts 1 from the penultimate digit (coefficient 1 50) for faster, largerstep changes. Independent settings: the fine adjustment and coarse adjustment coefficients can be set separately, giving you full control over step sizes during tuning. User interface: navigation and adjustments are performed using a compact encoder button, with the results shown on a Big Nixie tube display for easy reading. Core features Fine tuning mode: last digit adjustment with coefficient 150. Coarse adjustment mode: penultimate digit adjustment with coefficient 1 50. Independent coefficient settings: fine adjustment and coarse adjustment can be configured separately. Perpulse current range: minimum 0.01 mA per pulse. Coarse perpulse maximum: 5.00 mA per pulse. Display: Big Nixie tube display for contrast readouts. Control: encoder button adjustment for precise, incremental changes. Compatibility and use cases Lab bench current pulse calibration: dial in exact current pulses for precision measurements and repeatable test conditions. LED driver or sensor testing: adjust pulse currents gradually to evaluate response, efficiency, and thermal behavior without overdriving components. Electronic development and prototyping: finetune signal currents during circuit debugging, rapidly shifting from micromilliamp precision to larger step changes as needed. Use scenarios Scenario 1: You need to set a small pulse current of 0.05 mA for a sensitive sensor. Use fine tuning mode to increment from 0.01 mA in precise steps until you reach 0.05 mA, observing the Big Nixie tube display for exact values. Scenario 2: You are testing a LED driver that requires quick ramp changes. Switch to coarse adjustment mode, set the penultimate digit coefficient to a higher value, and adjust by larger steps to reach the target current faster, then finetune with the fine mode if needed. Scenario 3: During calibration, you must switch between tiny current steps and larger changes while monitoring results on a clear, legible display. The independent fine and coarse coefficients support this workflow without reconfiguring hardware. Technical notes Version: 2.04 Display: Big Nixie tube display for clear readouts Control: encoder button adjustment for intuitive operation Modes: Fine tuning mode and Coarse adjustment mode Fine tuning coefficient: 150 (affects the last digit) Coarse adjustment coefficient: 1 50 (affects the penultimate digit) Separation: Fine and coarse coefficients can be set independently Current per pulse: minimum 0.01 mA; coarse perpulse maximum 5.00 mA
  • Fruugo Kimliği: 418257903-881776502

Teslimat ve İade

24 saat içinde kargoya verilir

  • STANDARD: ÜCRETSİZ - Arasında teslimat Çar 08 Ekim 2025–Cum 24 Ekim 2025 - ÜCRETSİZ

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Shenzhen Tuku Supply Chain Co., Ltd.
  • Shenzhen Tuku Supply Chain Co., Ltd.
  • 202-5, Jinhe Building, 8 Xinhe Street
  • Maan Tang, Bantian , Longgang, Shenzhen, Guangdong
  • China
  • Guangdong
  • CN
  • 518129
  • caryleroot@outlook.com
  • 13428666765

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • Axitera GmbH
  • Axitera GmbH
  • Kreuznacher Str.30,D-60486
  • Hessen,Frankfurt am Main
  • Germany
  • Frankfurt am Main
  • DE
  • 60486
  • successservice3@gmail.com
  • (+49)6934873848
  • https://seller.kuajingmaihuo.com/settle/qualification-service