PTC08 is an industrial-grade image acquisition and processing module that integrates image capture, shooting control, data compression, and serial transmission. Its built-in high-performance digital signal processing chip enables high-ratio compression of raw images. The output images adopt the standard JPEG format, ensuring easy compatibility with various image processing software. The module features a standard three-wire RS-232 communication interface and a simple image transmission protocol, allowing seamless connectivity with computers and embedded systems. Additionally, it includes a reserved infrared fill-light interface, which supports external infrared light panels for clear imaging under various lighting conditions. The PTC08 Serial Camera Module consists of two main parts: the module body and the serial connection cable. These two components are linked via a 4-pin 2.0mm pitch standard connector, which allows for easy plugging and unplugging. Module board size: 32mm x 32mm Image sensor type: CMOS 1/4 inch Image pixel: 300,000 Pixel size: 5.6um x 5.6um Output format: standard JPEG/M-JPEG. White balance: automatic Exposure: automatic Gain: automatic Shutter: electronic rotary shutter Signal to noise ratio: 45DB Dynamic range: 60DB Maximum analog gain: 16DB Frame rate: 640*480 30fps Scanning mode: progressive scanning Monitoring distance: about 10 meters. Max. 15m, adjustable Image size: VGA(640x480), QVGA(320x240) Serial port rate: 38400 by default and 115200 by maximum. Operating current: 75MA Working voltage: DC +5V Communication interface: RS232 (three-wire TX, RX, GND) Color:As Shown Material:PC Package Contents: 1 * Camera module 1 * Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.