Pico 2 W Sensor Kit which is including 15 common modules such as LED, button, buzzer, etc. All-in-one design, all modules are connected to Pico 2 W via PCB castellated holes, no soldering or wiring is required. Each module can be easily separated for individual use, offering more flexibility for your experiments and projects. Standard for Raspberry Pi Pico 2 W header, plug-and-play, also comes with clear Acrylic protection case, this kit is your ideal choice to quickly build prototypes or explore the functionality of various sensors. For Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.<br><br>Development board uses RP2350 microcontroller chip designed by Raspberry Pi. Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2 520KB of SRAM, and 4MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 x multi-function GPIO pins 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels Temperature sensor 12 x Programmable I/O (PIO) state machines for custom peripheral support USB cable color is random, No specification accepted Different batches may cause differences in printing/appearance, which will not affect the use; the actual product may have color differences due to different lighting or display Material: PCB + components + plastic Color: As shown<br><br>Package Contents: 1 x Development Board (yellowpin header