PDB XT60 Power Distribution Board with BEC 5V 2A & 12V 0.5A Output for DIY Quadcopters

₺624,00
+ ₺487,49 Kargo

PDB XT60 Power Distribution Board with BEC 5V 2A & 12V 0.5A Output for DIY Quadcopters

  • Marka: Unbranded

PDB XT60 Power Distribution Board with BEC 5V 2A & 12V 0.5A Output for DIY Quadcopters

  • Marka: Unbranded
Fiyat: ₺624,00
Satıcı:
₺624,00
+ ₺487,49 Kargo

Stokta var

14 Günlük İade Politikası

Ödeme yöntemleri:

Tanım

PDB XT60 Power Distribution Board with BEC 5V 2A & 12V 0.5A Output for DIY Quadcopters

Explanation: Material: circuit board Color as shown Board size: 5.2 cmx 3.6cm x0.3cm Board weight: 7.5g (includes 11g) 2oz copper, 4-layers and 1.6mm PCB Built-in XT60 Socket Light and durable for intensive usage Quick and Easy Installation Total 6 pairs ESC solder tabs are fit for H or X type frame 5V and 12V Output LED indicators and Short circuit tolerant General: Input voltage range (3S-4S LiPo operation): 9-18V DC Regulated outputs: 5V and 12V outputs ESC outputs: Continuous current: 25Ax4 or 15Ax6 current (10 seconds or minute): 30Ax4 or 20Ax6 BEC 5V output: Designed for: RC Receivers, Flight controllers, OSD, and Servos BEC Mode: Linear Voltage: 5.0 0.1VDC Continuous current: 2 Amps (Max.2.5A 10s or minute) Output Ripple: 40mV (VIn=16V, VOut=5V 2A load) Short-circuit tolerant: 5 seconds or minute BEC 12V output: Designed for: Video TX or FPV camera with linear regulator BEC Mode: Linear Suggested battery: 4S LiPo (13-18V DC) Voltage: 12.0 0.3VDC Continuous current: 500mA (Max.0.8A 5s or minute) Short-circuit tolerant: 2 seconds or minute Package Contents: 1 x PDB Board 1 x XT60 Connector 1.The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36x52mm and 4 layers PCB. 2.It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised and regulated DC 5V outputs and linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, , etc. 3.The PDB-XT60 offers a Authentic XT60 plug to connect the LiPo pack conveniently. 4.4-layer PCB Board, high current power and BEC stratification, avoid ground disturbance BEC power current 5.This board makes the wiring nice, with the bonus of having the XT60 option. Stacked right on top of the CC3D with plenty of room.
  • Fruugo Kimliği: 412956352-872970842
  • EAN: 9643901125581

Teslimat ve İade

2 gün içinde kargoya verilir

  • STANDARD: ₺487,49 - Arasında teslimat Çar 07 Ocak 2026–Çar 14 Ocak 2026

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Haihe1
  • Yiyang Qijiayi Home Furnishing Co., Ltd.
  • Room 1607, Building 4, Phase II, Zishanhu Yuyuan (Zishan Dasha), Zishanhu Community, Chaoyang Street
  • Yiyang
  • CN
  • 413099
  • tangyu_2513@163.com
  • 18681481963

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901