Standard backlight 6PIN, interface, can be connected to an external high-voltage board The driver board integrates the LCD screen LED backlight driver board circuit, Standard LVDS signal output, can support single 6, single 8, dual 6, dual 8 and other standard LVDS signal LCD screens, but only supports LCD screens with a screen power supply of 3.3V Standard keypad interface, and supports dual-color LED indicator display Support TTL signal output such as: AT070TN92 AT065TN14 AT080TN52 AT090TN12 AT090TN10 AT070TN90 AT070TN93 AT070TN94, etc. (TTL LCD screen with universal 50PIN interface) 1-way VGA signal input 2-way AV signal input 1-way signal input, and this IC supports HDMI1.2 1-way reversing signal input Support wide voltage input, and can work normally between 5V-24V, Supports the following LCD screens: EJ070NA01-1024X600 resolution EJ080NA04B-1024X768 resolution ZJ070NA01, universal 40PIN high-resolution LCD screen With PCB800039L adapter board, it can also support Chinese 60PIN LVDS 10.1-inch LCD screen, The maximum output display resolution of this driver board is 1920X1200. When the display resolution exceeds 1440X900, it is necessary to add a heat sink depending on the working condition of the IC. Reduce the working temperature of IC) This IC, VGA part can directly input YPBPR signal, through the program This driver board can add remote control function (need to be implemented by software) This driver board can support automatic detection signal switch function,--this function is a customized function This driver board can add BNC interface---need to be customized Support reversing control and display on AV2, reversing voltage supports voltage input within 50V Different batches may have different appearances, but not affect the use Colour:Blue Material:Metal + Plastic Package Contents: 1 x PC Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.