Condition: 100% NewItem Type:Orthodontic Dental AdhesiveOptional Type:Large Set,Small SetMaterial: PlasticService Life: 18 MonthsStorage Condition: Keep below 25 (do not freeze)Suitable for: All kinds of dental orthodontic attachment adhesionMain Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2Usage:1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.Glue the bracket and the tooth surface immediately after applying the paste.Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.Remove excess liquid and paste after 40-60 seconds.After curing for 5 minutes, orthodontic operation can be performed .wang-edit-text{ font-family:& 39;Arial& 39; important; } .wang-edit-text table { border-top: 1px solid 000; border-left: 1px solid 000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid 000; border-right: 1px solid 000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; } 1Mainly used for bonding various dental orthodontic accessories. 2Easy to use, less waste, independent operation and other advantages. 3Has high clinical bond strength, high efficiency and convneient to use. 4Wonderful new - generation enamel adhesive resin, complete accessory. 5There are 2 different types available, you can choose by your needs.