1.5mm Waste Oil Burner Nozzle,Air Atomizing Nozzle,Fuel Oil Nozzle,Full Cone Oil Spray Nozzle 1. The use of compressed air to swirl inside the tubes and mix the atomized droplets impact. 2. Can produce tiny Mini particle size mist particles at low pressure and low volume conditions. 3. Can control the air flow and pressure to adjust the spray flow, angle and size granularity. 4. Since the fluid passage has a large, and therefore have a good anti-clogging effect. 5. In oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good. Fuel nozzle siphon air atomizing nozzle two-fluid nozzle crude oil heavy oil waste oil Alcohol-based fuel burner nozzle oil inlet :1/8 inch air inlet: 1/4 inch Nozzle size: 9/16 inch 1.5mm diameter, the liquid water flow is 11L/H Product Introduction Siphon air atomizing nozzle is a low pressure can spray atomization of the at low pressure air atomizing nozzle. Widely used in , heavy oil, waste oil, animal and vegetable oils, alcohol-based fuel burner system, and for , oil atomization. Product Features Application Widely used in , heavy oil, waste oil, waste oil, animal and vegetable oils,and other alcohol-based fuel oil, gas, combustion spray systems, spray workshop humidification cooling system, mechanical cleaning dust,various types of industrial spray aerosol . Colour:Silver + gold Material:metal Size:Connector diameter: 8mm hole diameter: 1.5mm length about 10cm Package Contents: 1*Fuel nozzle Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.