Non Contact LCD Digital Dual Mode Smart Multimeter Voltage Detector Resistance Frequency Tester

1、The curved display increases the visible image range and makes the human visual experience more comfor. 2、Eliminating visual distortion at the edge of the screen and creating the most natural and comfor look. 3、LCD screen, when testing indoor or low light environments is very advantageous, its screen is clearer and the test speed is very fast. 4、Smart technology make this multimeter can automatically identifies the tested parameters and choose their required range. 5、It can measure DC/AC voltage, resistance, frequency and live wire in the wall. 6、With flashlight lighting function, even in dark conditions can see clearly.Condition: Brand NewItem Type: Smart MultimeterMaterial: ABSColor: BlackSize: Approx.150x40x17mm/5.9x1.6x0.7inWeight: Approx.120g/4.2ozAuto rangeFull range overload protectionThe maximum Voltage Allowed at the Measuring Terminal: DC: 400V or AC: 400V effective valueWorking Height: 2000mDisplay: LCDMaximum Display Value: 2000 digitsSampling Rate: about 3 times / secondAutomatic Shuown Time: About 2 minutesWorking Power Supply: 1x3V AAA not includedDC voltage Range: 400V Resolution: 0.01V Accuracy: ± 0.8% reading + 3 wordsSensitivity: Minimum 0.5V DC voltageMaximum Input Voltage: 400V DC or AC effective valueAC voltage AC range: 400V Resolution: 0.01V Accuracy: ± 1.2% reading + 3 wordsSensitivity: Minimum 1V AC voltageInput Impedance: 1MΩMaximum Input Voltage: 400V DC or AC effective valueFrequency Range: 50HZ-60HZ,ue effective value responseResistance Ω range: 100Ω Resolution: 1Ω Accuracy: ± .2% reading + 3 wordsFrequency HZ range: 1000HZ Resolution: 0.1HZ Accuracy: ± 2% reading + 3 wordsVoltage Detection Alarm:Low Gear: Displayed1/3 analog bar, buzzer sounds an alarm and the green voltage indicator is displayedMid-Gear: Display 2/3 analogue bar, buzzer sounds alarm and light yellow voltage indicatorHigh-Gear: Display full grid simulation bar, buzzer emits higher frequency alarm sound, light up red voltage indicatorTemperature coefficient: less than 0.1X accuracy / ℃Working Temperature and Humidity: 0-40 ℃ not considered when <80% RH, <10 ℃Storage Temperature and Humidity: -10-60 ℃ <70% RH, remove the battery 1 x Smart Multimeter1 x Pair of Test Leads1 x Insuction Manual1 x Lanyard