The product itself does not have double-sided adhesive tape, and the non-marking double-sided tape is an additional gift The size is measured manually, it is inevitable that there is have errors, which will not affect normal use Non-marking sticker design, paste firmly to the wall without leaving a brand Place two adjacent one to the other, which can contain a thinner cutting board, a pot lid, etc. The cup of water can be suspended and the bottom is equipped with a drain hole for easy drainage of water it can be glued upside down under The cabinet to install blotting paper, roll towels, etc. Can be glued to the side of the refrigerator, hang a plastic film, absorbent paper, etc. It can be glued next to the bathroom toilets and placed in roll toilet paper, which is multifunctional Installation method: 1. Wipe the smooth wall where you want to paste the 2 slot. Detach the protective film on the side of the adhesive 3. Paste it at the rear of the product and extract it by hand 4. Detach the protective film from the other side of the 5 adhesive. Paste the product on the wall and press it firmly 6. Use after 24 hours of rest, the effect is better Reminder: 1. Please install according to the method of use, stability is the best. 2. All walls are not suitable for use, are not suitable for walls: plaster walls, wallpaper walls, painted walls