Motor Driver Controller Board For MKS OSC Stepper Motor Drive Controller Speeds Regulation Positive Negative Rotation Controller Motor Driver Controller Board For MKS OSC Stepper Motor Drive Controller Speeds Regulation Positive Negative Rotation Controller Feature: 1. This module is a pulse generation module that provides control signals to the stepper driver. In order to control the stepper motor, a driver must be equipped. 2. This simple controller + stepper motor + stepper motor + DC power supply can form a simple control platform. 3. The controller has 3 low-frequency signals, high 5.4k-160khz, middle 540-16.6khz, and low 80-2.4khz, which can be used to select jumpers. 4. It can generate pulse signals or PWM signals, and jumpers can be selected. 5. Measuring frequency: PUL and common cathode. Performance parameters: Color: as shown in the figure Power input: 8-24V Speed range: high 5.4k-160khz, middle 540-16.6khz, low 80-2.4khz Size: 58mm*38.6mm This module is a pulse generation module that supplies the stepper driver as a signal. If you want to control the stepper motor, you must also equip it with a driver. This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform. Frequency measurement: You can measure the two ports of PUL and common cathode (or common anode). Different stepper drivers may be marked with different names EN = ENA = FREE enable PUL = PULS = CLK pulse DIR = CW = CWW direction Common anode connection method (B) EN + PUL + DIR + connected to com +. EN- connected to EN PUL- connected to CLK DIR- connected to DIR Common cathode connection method (B) EN-PUL- DIR- connected together EN + connected to EN PUL + connected to CLK DIR + connected to DIR Package includes: 1x control signal generator module _x000D_