Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

₺2.249,00
+ ₺668,49 Kargo

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marka: Unbranded

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺7.090,00
Fiyat: ₺2.249,00
Kazancınız: ₺4.841,00 (68%)
Satıcı:
₺2.249,00
+ ₺668,49 Kargo

Stokta var

14 Günlük İade Politikası

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

Mini Spot Welder Machine Portable Transistor 18650 Lithium Battery compatible with Capacitor

1Welding power can be powered by lithium battery or 12V car battery. 2The controller adopts single chip microcomputer control, accurate output pulse, LCD display screen, can display welding parameters. 3The soldering pen and the input wire are connected by Ushaped coldpressed terminals, which is convenient for disassembly and replacement. 4The controller adopts automatic welding mode, while retaining the manual trigger interface, you can choose according to your own usage. 5The power board uses 2 ounces of copper, and the soldering pen wire and the input wire use 10AWG multiwire soft wire to increase the overcurrent capacity. 6Five 300A MOS tubes are driven by imported special chips, and the MOS tubes can be used as fast as 20nS, which can switch quickly to prevent tube explosion. 7The controller is mainly for welding 0.1mm to 0.15mm nickelplated steel strip, and the power input adds a 25V10000uF highfrequency lowresistance capacitor for energy compensation to increase stability.Item Type: Mini Spot WelderProduct Description:1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm nickel-plated steel strip and 0.15mm nickel-plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm nickel-plated steel strip perfectly. Note that it is a car battery, not an ordinary lead-acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in1 x Spot Welder1 x Connector2 x Power Input Line2 x Soldering PenPlease note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
  • Fruugo Kimliği: 341577521-748850994
  • EAN: 653582880708

Ürün Güvenlik Bilgileri

Lütfen aşağıda özetlenen bu ürüne özel ürün güvenlik bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Ürün Güvenlik Etiketleri

CE Mark
Güvenlik Uyarıları: Not suitable for children under 36 months, Adult supervision recommended

Teslimat ve İade

3 gün içinde kargoya verilir

  • STANDARD: ₺668,49 - Arasında teslimat Cum 26 Aralık 2025–Cum 02 Ocak 2026

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Shenzhen Xunxing Xiangcheng Foreign Trade Technology Co., Ltd.
  • Shenzhen Xunxing Xiangcheng Foreign Trade Technology Co., Ltd.
  • Room 201-08, Xiangqian Building, No. 4012, Longgang Avenue (Longgang Section), Nanlian Community
  • Shenzhen
  • China
  • 518116
  • chenghduyubin5542@outlook.com
  • 86 134 21832945

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • IVAN VOLENYUK KOROLYUK
  • IVAN VOLENYUK KOROLYUK
  • 24(medio), Calle Cadiz, 12006, Castellon de la Plana, Castello, Spain
  • Castellon de la Plana
  • Spain
  • 12006
  • vanvolenyuk@outlook.com
  • 34662164290