Microcomputer Digital Temperature Controller 110-220V for Hatching XH-3002

₺159,00

Microcomputer Digital Temperature Controller 110-220V for Hatching XH-3002

  • Marka: Unbranded

Microcomputer Digital Temperature Controller 110-220V for Hatching XH-3002

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺309,00
Fiyat: ₺159,00
Kazancınız: ₺150,00 (48%)
Satıcı:
₺159,00

Şu anda mevcut değil

Bu ürünün stoğa tekrar gelip gelmeyeceğini veya ne zaman geleceğini bilmiyoruz.

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

ItemType: Digital Temperature Controller Material: Plastic Weight: Approx. 51g / 1.8oz Operating Voltage Specifications: 12V, 24V, 110-220V Accuracy Level: 0.1 Temperature Measurement Range: -50-110 () Temperature Measurement Accuracy: -15-65 () Humidity Measurement Accuracy: 1 (RH) Temperature Measurement Error: 1 () Applicable Environment: -15-55 / 20%-85%RH Product Embedded Hole Size: 73mm / 2.9in, Hole Diameter (4mm) How to use: 1. Press the setting button once to enter the internal menu, the default display is P0, press the setting button again, and set the required starting temperature through the up and down buttons. 2. Press the setting key once to enter the internal menu, the display is P0, switch to P1 through the up and down keys, press the setting key again, and set the required stop temperature through the up and down keys. 3. Enter the internal menu in the same way, switch to P2 through the up and down buttons, press the setting button again, and set the required calibration temperature through the up and down buttons. (Note: In the setting, if the detected temperature value is 0.5C larger than the actual temperature value, then the calibration temperature that needs to be set is -0.5C. If the detected value is 1C lower than the actual temperature value, the calibration temperature that needs to be set is 1C. Detection temperature + Correction temperature = Actual temperature.) 4. Enter the internal menu in the same way, switch to P3 by pressing the up and down buttons, press the setting button again, and set the required delay time through the up and down buttons in minutes. (Note: Delayed start is generally used for compressor refrigeration. If it is used for refrigerators and freezers, this value needs to be set. According to the compressor back pressure, the general setting value is 3-6 minutes. If you are not used for control or no delay function is needed, just skip it. Temperature control mode 1. Setting essentials: Start temperature stop temperature. 2. Press the setting key to enter the internal menu, select P0 to start the temperature change and set the P0 value to 30C. 3. Press the setting key to enter the internal menu, select P1 to stop the temperature and set the value of P1 to 26. 1A variety of fields perfect use, convenient operation and practical settings, is your side temperature control housekeeper. 2It is precise and reliable with good long?term stability. Convenient for install and fixed. Small size, low power consumption, fast response. 3Easy operation, to set start temperature, stop temperature, corrected temperature connector and so on. 4Suitable for hatching, breeding, air and water temperature control and other related temperature detection and control. 5Specifications are optional, precise temperature control, temperature calibration.1 x Temperature Controller1. Press and hold the up and down keys at the same time, wait until the screen displays 888 to restore the factory settings. 2. The screen displays LLL, indicating that the temperature probe is not plugged in, disconnected, or damaged, just replace it. 3. The screen display HHH indicates that the temperature probe is short?circuited and exceeds the temperature detection range.
  • Fruugo Kimliği: 309868575-693457337
  • EAN: 6991520974787

Ürün Güvenlik Bilgileri

Lütfen aşağıda özetlenen bu ürüne özel ürün güvenlik bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Ürün Güvenlik Etiketleri

CE Mark
Güvenlik Uyarıları: Do not use in high or low temperature environments

Teslimat ve İade

-1 gün içinde kargoya verilir

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Lingao Pingfeng Trading Co., LTD
  • Lingao Pingfeng Trading Co., LTD
  • Room 504, Building 2, No. 46, Duowen Village, Duowen Town, Lingao County, Hainan Province
  • Hainan Province
  • China
  • 571825
  • qinzhangyi2345@163.com
  • https://www.fruugo.co.uk/search/?merchantId=22840

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • APEX CE SPECIALISTS
  • APEX CE SPECIALISTS
  • 64 Rue Waldeck-Rousseau 69006
  • LYON
  • France
  • 69006
  • Julien@specialisis.com
  • 33 745436814
  • https://www.fruugo.co.uk/search/?merchantId=22840