Features: CNC process, aluminum alloy shellM2. NVME dual bayThe array reads 4 RAID modesHigh-speed transfer of USB3.2 GEN2 20GbpsSpecification: Transfer interface: USB2.0, USB3.0, USB3.1, USB3.2, USB4Transmission speed: 20GbpsMain control: JMS586RType-C power interface: conventional TYPE-C mobile phone charger and computer charger can be usedP1&P2 SSD indicator: The green light is lit when the SSD recognition is normal, and the green light flashes when reading and writing data. When the SSD fails, the red light flashes.RAID mode setting steps: 1. Install the SSD, plug in the data cable and power cable, and the power is turned off.2. Dial the RAID mode gear to the desired position3. Press and hold the "RESET" button, then turn on the power switch, and release the "RESET" after hearing the "drop" sound for three seconds.4. After the RAID setting is completed, you need to enter Disk Manager for initialization.Note: Switch RAID mode, data will be lost, please be cautious.Recommendation: Before switching RAID mode, back up data.size: 10.9 x 7.1 x 1.3cmMaterial: Aluminum alloycolour: greyPackage Contents: 1 x hard drive enclosure1 x USB A to USB C cable1 x cable1 x USB A to USB C adapter1 x USB C to USB A adapter1 x screwdriver8 x heat sinks padOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.