Features Support for Various Trigger Modes: The USB logic analyzer complete support for various trigger modes, rising edge, falling edge, high level trigger, low level trigger, and the above four basic methods combined into a complex trigger. Good Performance: The USB logic analyzer each channel at up to 24M times per second. The data is uploaded in real time, the upper computer adopts compressed storage, and the maximum collection depth is 10T, far exceeding the actual demand. 8 Channel Inputs: The USB logic analyzer has 8 channel inputs-you can monitor 8 different digital signals simultaneously. Sampling rate up to: 24 MHz, sampling speed record: 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz. Intuitive: The USB logic analyzer convert the digital signal into digital waveform and display it on the PC screen. Many standard protocols can be used to analyze the signal to obtain more direct communication data. All the way to the logical pen instructions, with a small light to indicate the level of CH1, very intuitive. Features: The USB logic analyzer is very helpful for the test and analysis of digital systems, the development and debugging of multiple communication programs, and the long-term monitoring and recording of some digital signals. Fine workmanship, with good performance and easy to use, has long service life. Specification: Item Type: USB Logic AnalyzerInput Characteristics: Capacitance: 5PF Impedance: 100K , (This is the more reasonable impedance we adopted after weighing, and it is only the mainstream parameter.) VIH (input Can Recognize High Level): Higher than 1.6V is recognized as high level. (It can be used to stably collect signals at 5V, 3.3V, 2.5V, 2.0V level. It can also work in 1.8V level system, but it is not very recommended.) Package List: 1 x USB Logic Analyzer 1 x USB Cable 1 x Jump Wire Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List 1 x USB Logic Analyzer 1 x USB Cable 1 x Jump Wire