Laser Head Lens Tantalum Capacitor KSS-210A for CD Player

Welcome to our shop! Introducing the KSS-210A tantalum capacitor optical pick-up, the heart of the optical drive, suitable for radio/CD players. This laser head has good stability and is easy to maintain or assemble due to its simple structure. It has excellent focusing and seeking performances for maximum stability, ensuring a safe and durable experience. The KSS-210A adopts a continuous operation mode, providing a high level of accuracy and sensitivity, making it convenient to use. Made of high-quality plastic, this laser head is easy to install and meets the original standard, ensuring a long service life. Item Type: Laser Head Material: Plastic Model: KSS-210A Application: Lens head for Radio/CD Player Laser Head Installation Knowledge: 1. How to judge the damage of the laser head: The damage of the laser head generally means that it does not read the disc or it is very difficult to read the disc. Some discs with poor quality cannot be read at all. When the device can normally recognize the machine, it is usually a laser head issue. If you encounter such a situation, simply disassemble the laser head to check the model and purchase the corresponding model to install, restoring the machine to its original state. 2. How to judge the model of the laser head: Generally, there is a model on the label of the laser head or on the base. If not, you can take a picture of the laser head and send it to us, and our professional technicians will confirm the model for you. Please ensure you confirm the model of the laser head you need before purchasing to avoid unnecessary returns. 3. How to install the laser head: When installing the laser head on the shelf, do not move the balance bar on the shelf. When disassembling the laser head, only adjust one screw of the balance bar on one side, and do not adjust the other side, as it may affect the balance. Improper adjustment can lead to the laser head not reading the disc. If you are unable to install it yourself, we recommend seeking professional assistance to ensure proper installation without damaging the laser head or the machine. 4. How to open the solder joints: When the laser head is shipped from the factory, there are generally protective solder joints (a larger solder joint on the circuit board or on the flexible cable) to prevent static electricity from damaging the laser tube. The power supply pin of the laser tube is short-circuited to the ground. Before installing the laser head, it needs to be opened with an anti-static soldering iron. Heat the soldering iron to about 250°C-280°C, disconnect the power supply, and then open the protective point to ensure the laser head functions properly. 1 x Laser Lens 100% Satisfaction: Our customers are our top priority. If you find any product problems after receiving the goods, such as damage and incorrect quantity, please contact the seller immediately. We strive to provide you with satisfactory after-sales service.