iFlight ProTek60 Pro HD FPV Drone Black BNF TBS

₺137.590,00
ÜCRETSİZ Kargo

iFlight ProTek60 Pro HD FPV Drone Black BNF TBS

  • Marka: Unbranded

iFlight ProTek60 Pro HD FPV Drone Black BNF TBS

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺235.790,00
Fiyat: ₺137.590,00
Kazancınız: ₺98.200,00 (41%)
Satıcı:
₺137.590,00
ÜCRETSİZ Kargo

14 Günlük İade Politikası

Şu anda mevcut değil

Bu ürünün stoğa tekrar gelip gelmeyeceğini veya ne zaman geleceğini bilmiyoruz.

Ödeme yöntemleri:

Tanım

iFlight ProTek60 Pro HD FPV Drone Black BNF TBS

This rig is designed for Komodo, Zcam, BMPCC and even GH5. It fits perfectly, secure and tight. Recommended battery size: 6S 3700mAh - 6S 4400mAh Estimated flight time: 3-6 minutes (depending on battery and your takeoff weight) Highlights and features: - Protected propeller, suitable for indoor and outdoor use, protects everything you might hit some nasty cuts - Universal camera mounts and accessories for mounting various cameras - iFlight ESC Commander PCB // Power distribution board for high capacity heat dissipation - Unique X-Class rated ESC motor driver for more power and reliability - large XING2 3110 // Power motor with very high lift and flight performance - Pre-installed GPS module (BF GPS rescue or INAV GPS RTH available) - up to 110 km/h / / 1.5 kg payload // total take-off weight up to 3.5 kg (maximum MTOW recommended) ProTek60 Pro BNF Specifications: BLITZ F7 Flight Controller ESC SucceX X80A Class X Motor: XING2 3110 1600KV GPS Module: iFlight M8Q-5883-GPS and Compass V2.0 (LINK) Wheelbase: 282mm Body Size: 380*351mm Top and Bottom Plate Spacing: 35mm (Aluminum Bracket Height) Propeller Size : 6 inch Weight: 1330g (without battery) FC // Flash F7 Microcontroller: STM32 F722 Gyroscope: MPU6000 Wheelbarrow: No Screen Display: AT7456E BEC: 5V 2.5A Black Box: 32MB UART: 6 Support Smart Audio/IRC Tramp VTX WS2812ledStrip protocol support: yes bepper: yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Installation method: 30.5*30.5mm/4 Size: 36.5*35mm Weight: 7.8g ESC // iFlight ESC control electronic board (4x SucceX X80A) Microcontroller: G071 Capacitance per ESC: 240UF total Low ESR Current sensor: yes Input: LIPO 2-8S BlHeli32 telemetry: Yes BEC: no Supports up to DShot DShot150/300/600/1200/MultiShot/OneShot PWM driver Firmware target: iFlight-BL32-PRO Weight: 8.1g Size: 40*17mm Components and parts included with ProTek60 Pro HD BNF ProTek60 Pro prebuilt and tested 1 x Evangelism X 6S 70C 4400mAh 1 x DJI FPV Air Unit + Camera 2 x Albatross LHCP 5.8GHz 100mm SMA FPV Antennas 4 x 6x4x3 Propellers (color may vary) 2 x iFlight Lipo 20 Straps* 295mm (Black) 1 x Quick Install Battery 1 x Support Key 1 x XT90 Male to XT60 Female Adapter Cable p style="text-align: center;">
  • Fruugo Kimliği: 101252942-213069329
  • EAN: 5043738625171

Ürün Güvenlik Bilgileri

Lütfen aşağıda özetlenen bu ürüne özel ürün güvenlik bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Ürün Güvenlik Etiketleri

CE Mark
Güvenlik Uyarıları:
  • Not suitable for children under 36 months
  • Choking Hazard
  • Adult supervision recommended
İçindekiler: Octinoxate 6.7%
Üretici Parça Numarası: a1904
Model Numarası: a1904
Seri numarası: a1904
Parti Numarası: a1904

Teslimat ve İade

-1 gün içinde kargoya verilir

  • EXPRESS: ÜCRETSİZ - Arasında teslimat Sal 20 Ocak 2026–Per 29 Ocak 2026 - ÜCRETSİZ

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle