1. Complies with J1772 standard 2. Features a sleek design with protective cover, supports front installation 3. Pin head designed with safety insulation to prevent accidental contact; protection level reaches IP54 4. Type: European to American adapter 5. Intended for charging applications Mechanical specifications: 1. Mechanical life: 10,000 no-load plug cycles 2. Insertion force during coupling: less than 80N (minimum 45N) Electrical specifications: 1. Rated working current: 16A or 32A 2. Working voltage: 110V250V 3. Insulation resistance: 1000M (DC500V) 4. Terminal temperature rise: less than 50K 5. Withstand voltage: 2000V 6. Contact resistance: maximum 0.5m Temperature range: 1. Operating environment temperature: -30C to +50C Recommended usage steps: 1. Connect the Type 2 end of the adapter to the charging cable 2. Connect the Type 1 end of the adapter to the vehicles charging inlet 3. Once the adapter clicks into place, charging can begin Remember to activate the charging station before use After charging is complete, disconnect from the vehicle side first, then from the charging station side. Remove the adapter from the charging station when not in use. Material: Thermoplastic Color: Black Package contents: 1 x Electric Charging Adapter Note: The package includes only the items listed above. Other accessories are not included. Lighting and display settings may cause slight variations in color representation. Measurement tolerances may vary by +/- 13 cm.