Usage Tips: 1. Complies with SAE J1772 standard 2. Sleek design with protective cover, supports front installation 3. Pin head features safety insulation to prevent accidental contact; excellent protection performance with IP54 rating 4. Type: European to American adapter 5. Intended for EV charging Mechanical Behavior: 1. Mechanical life: over 10,000 no-load plug cycles 2. Coupling insertion force: between 45N and 80N Electrical Performance: 1. Rated working current: 16A or 32A 2. Working voltage: 110V250V 3. Insulation resistance: greater than 1000M (DC500V) 4. Terminal temperature rise: less than 50K 5. Withstand voltage: 2000V 6. Contact resistance: maximum 0.5m Ambient Temperature: 1. Operating environment temperature: -30C to +50C Recommended Usage Steps: 1. Plug the Type 2 end of the adapter into the charging cable 2. Plug the Type 1 end of the adapter into the vehicles charging socket 3. Once the adapter clicks into place, charging can begin Remember to activate the charging station After charging: - Disconnect from the vehicle side first, then from the charging station side - Remove the adapter from the charging station when not in use Material: Thermoplastic Color: Black Package Contents: 1 x EV Charging Adapter Note: The package includes only the items listed above. Other products are not included. Lighting and display settings may cause slight variations in color between the image and the actual item. Measurement tolerance: 13 cm