Features 1The adhesive tape made of PTFE is extensible and elastic, and can always maintain the original softness. 2Can withstand a high temperature of 300 and has better antiaging percompatiblemance. It is not easy to crack when pasted on the exterior of the object. 3Not easy to adhere to any substance, and it is easy to clean all kinds of oil stains, stains or other attachments attached to its exterior. 4The thickness is moderate, and it can be very firm without winding multiple layers during use. 5Commonly used compatible thermoplastic demoulding, packaging and sealing operations in the electronics and industrial manufacturing industries Specification Item Type: Heat Resistant Tape Material: PTFE Specification: Thickness: Approx. 0.18mm / 0.01in; Width: Approx. 13mm / 0.51in; Length: Approx. 10m / 32.8ft Thickness: Approx. 0.18mm / 0.01in; Width: Approx. 19mm / 0.7in; Length: Approx. 10m / 32.8ft Thickness: Approx. 0.18mm / 0.01in; Width: Approx. 25mm / 1in; Length: Approx. 10m / 32.8ft Thickness: Approx. 0.18mm / 0.01in; Width: Approx. 50mm / 2in; Length: Approx. 10m / 32.8ft PTFE tape roll with adhesive backing. It is suitable compatible almost all vacuum sealing machines, as well as most types of hand/pulse heat sealing machines to replace deteriorated or burnt tape, which is an important barrier between the heating element and the bag. Old tape will cause poor sealing of the bag and may cause damage to the heating element and damage to the sealer. Just peel the tape from the roll and place it on the correct area (you need to clean the sticking position becompatiblee placing the new tape). Above the wire of the vacuum sealing machine, below the wire of the pulse sealing machine Package List 1 x Heat Resistant Tape