High Quality For Sur-Ron Light Bee Segway Pedal Fixing Bracket and Supporting Rod Kit

SUR-RON FIX FOOT PEG MOUNTING BRACKET PACKAGE 7075 BILLET SEGWAY SURRON REPAIR MOD _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Description: _x000D_ replacement Billet Foot Peg Mounting Brackets for Sur-Ron MX _x000D_ electric bike made from 7075 aluminum. These billet brackets replace _x000D_ the weak oem cast brackets that are known to fail. _x000D_ _x000D_ Includes Foot Peg Support Brace to protect against all jumping, hard riding _x000D_ and against general fatigue that the cast foot peg brackets suffer from. _x000D_ _x000D_ Does n ot include kickstand and simply uses all factory parts to swap _x000D_ over for ease of installation. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Installation Tip: _x000D_ Be sure to always use anti-seize when installing the UPR Billet Foot Peg _x000D_ Mounting Brackets and Support Brace System. This will allow the frame _x000D_ to be evenly pulled back into place when tightening as its very common _x000D_ for the frames to be bent inward causing a gap when trying to install the _x000D_ mounting brackets. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ The anti-seize will ensure a smooth thread operation and allows the bolts _x000D_ to be turned easily without extra stress. Be sure to tighten each side evenly _x000D_ so it pulls the frame peg mounts back out to the original location. Some times _x000D_ one side will be bent more than the other as people have a tendency to lean _x000D_ to one side more than the other. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Once you have gotten the frame to contact the billet mount bracket surface _x000D_ evenly and have the support brace installed you are done. As long as you take _x000D_ your time and go slow and with returning the frame back to its original location _x000D_ you will have brought your frame back to 100% and boxed it properly with the _x000D_ new mounts and support brace eliminating this from happening ever again. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ * Never grab the kickstand and try and bend the mount to get the kickstand from _x000D_ contacting the swingarm. The kickstand is hitting the swingarm because the _x000D_ mounting bolt location in the frame is bent and that is the main reason the _x000D_ support brace was designed to correct this problem. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_