The product features a 14-bit rotary position sensor with digital angle interface and pulse width modulation output. The AS5048A is a 14-bit rotary position sensor for absolute angle measurement, providing PWM output over 360 degrees based on non-contact magnetic sensor technology. It delivers full-rotation output and is ideal for shaft applications where a simple two-pole magnet rotates above or below the sensor IC. The zero position can be programmed into the device using simple SPI commands. Absolute magnetic angular position resolution is 14 bits (16384 positions per revolution), with digital values transmitted via a serial interface (SPI). The AS5048 provides PWM output and supports SPI or I2C communication for absolute angle measurement with a microcontroller. During mechanical design, precise alignment between the chip's initial zero position and the magnet's poles is not required, as the zero position can be programmed during assembly using standard SPI or I2C commands without special equipment. The device includes integrated memory. The AS5048 offers high operational tolerance, accommodating variations in the centering between the chip and magnet, air gap deviations, and temperature ranges from -40°C to +150°C. This magnetic rotary encoder delivers improved measurement accuracy compared to previous magnetic encoder models. Its 14-bit analog front end enables a resolution as fine as 0.0219 degrees. With microcontroller-based linearization and averaging, angular measurement accuracy can reach 0.05 degrees. Item Type: Magnetic Encoder Resolution: 14-Bit full-scale resolution Angle Accuracy: 0.05 degrees Power Supply Voltage: 5V DC Material: Synthetic paperboard 1 x Wiring 1 x Magnetic Encoder