For NanoPi NEO is an wireless maker board with a size of only 40x40mm.Allwinner's H3 quad-core A7 main control is used, the highest operating frequency can reach 1.2Ghz, the pins are with NanoPi NEO (wired network version, V1.2), and with 24pin GPIO.For NanoPi NEO is equipped with 512M DDR3 memory, standard 8GB eMMC high-speed flash memory, integrated AP6212 WiFi Bluetooth module, supports microSD card to the operating system.With YUV422 parallel camera interface, it can support up to 500W pixel CMOS camera sensor.For NanoPi NEO adopts a more professional system design, adopts 6-layer board wiring, and has good heat dissipation characteristics.CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHzMemory: 512M DDR3 RAM: 8GB eMMCWiFi: 802.11b/gBluetooth: 4.0 dual modeMicroSD Slot: x1MicroUSB: OTG and inputDebug Serial Port: 4Pin, 2.54mm pitch pin headerGPIO1: 2.54mm spacing 24pin, It includes UART, SPI, 12C, GPIO;GPIO2: 2.54mm spacing 12pin, It includes USBx2,IR, SPDIF, I2S;PCB Layer: 6 Supply: DC 5V/2AOS/Software: u-boot, UbuntuCoreSize: 40 x 40mmMaterial: PCBColor: BluePackage Contents:1x Development Board1x 12x2pin Double-Row Pin Header1x 12pin Single-Row Pin Header1x 8pin Single-Row Pin Header1x AntennaOnly the above package content, other products are not included.Note: Light reflection and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.