Adopt ARM -M3 processor , and include a 2.4-inch color TFT display screen. Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers. easy to install and operate. With Auto/Normal/Single trigger modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous waveform before trigger(negative delay). With waveform parameter digital display, including frequency, period, duty ratio, MAX./MIN./AVG./-/virtual values. Short-circuit and open-circuit detection: can help the user find out the soldering error. TFT controller recognition function. The SMD has been soldered, more suitable for electronic beginner. Maximum Real-time Sampling Rate: 1MSa/s Analog Bandwidth: 0-200KHz Sensitivity Range: 5mV/-20mV/ Maximum Input Voltage: 50Vpk (1X probe) Input Impedance: 1M ohms/20pF Accuracy: 12 Bits Record Length: 1024 points Coupling Modes: DC / AC / GND Time Base Range: 500s/ - 10us / Trigger Modes: Auto, Normal, and Single Trigger Position: Center of Buffer Supply Voltage: DC 9V(8-10V) Current Consumption:~120mA @ 9V Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Voltage: AC 220V Colour:As Shown Material:plastic Package Contents: 1 x Handheld Pocket Oscilloscope Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.