FEP Films Expandable Film Transparent For 3D Printer Feature:1. The film drop down size is 280mm x 200mm, which is suitable for D8 duplicator size and is universal for 8.9in LCD screen devices.2. The thickness is only 0.1mm, with release force, better light transmission and smoother appearance quality.3. Demoulding is easier and quieter, the curing time is shorter, the curing effect is better, and the printing accuracy is higher.4. With high light transmittance, ultraviolet light reaches 95%, and prints are more glossy and beautiful.5. This film is suitable for all stationary light curing machines, easy to and use. Specification:Item Type: Drop Down FilmMaterial: Resin Photosensitive Product Size: Approx. 280x200x0.1mm/11x7.9 x 0.004inApplicable Models:For SparkMaker LD050For YDM-YDP-192120For YDM-YDP-215135For KLD LCD1250For KLD LCD1260SDla Wanhao D8For ILUMI v2 v3For DLP PhotonFor YHD-101For PhrozenFor Bean KudoFor LD-003For Solomon LCD SL3Package List:1 x Drop Down FoilOr5 x Drop Down FoilOr10 x Drop Down FilmNote:(1) Voltage: This film is suitable for all desktops for light curing (film stretching tray structure), common screw buckle design. The tension of the film in the tray has certain factors that affect the demoulding effect. Please tighten the film on the tray with the appropriate tension according to the size of the center of the tray. It should not be too loose or too tight. For specific methods, please explore with your own computer. (2) Service life and replacement: We can't make exact promises about the service life, due to the molding format, resin composition, frequency of use, model height, and the use of each device habits are not the same, so it is not possible to give a standard of living. Replace the film at a time when the film surface is severely scratched and the elasticity disappears.