REMOTE CONTROL COMPATIBLE WITH FAAC TM1300, TM2300, TM3300: This remote control is compatible with the FAAC TM 300 series (as shown in the photo above). The compatible model must have the generic writing TM300, TM300S or TM1 300 or TM2 300 or TM3 300 depending on the number of keys, the 12 coding dip switches (microswitches) (10 on old models). If the model writing is no longer visible on the back of the remote control, open the container and check the electronic card, it should have a screen print or label with the code. Dimensions (5.5x3.5x1.3) cm. FEATURES: Self-learns the code directly from the original remote control. Produced in ABS and aluminum with a refined and modern design.It is equipped with a 27a 12v battery already included in the remote control.It has the possibility of memorizing up to 4 commands (all at the same frequency).Fixed code fixed at 330 mhz li> PROGRAMMING INSTRUCTIONS: Simultaneously press and hold the and 34 Openand 34 and Close, the LED flashes 3 times, then simply release the Close button. and press it quickly 3 times. The LED light will start flashing, then release the Open button as well.Place both remote controls back to back.Press and hold the button on the remote control to copy, then press and hold a button on the universal remote you want to program and hold both buttons until the LED light flashes continuously. NB : a color of the buttons or the body of your remote control different from that of the photo compromises compatibility. NB: To receive an invoice it is necessary to send a message directly to the seller with all the invoicing data including the PEC or the Recipient Code. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.