Welcome to our store！</br> 1、Adjustable 4 modes:25mW/100mW/200mW/OFF 2、700VTL camera, 120degree field of view 3、Betaflight/Cleanflight OSD setting of power,bands,channels and PitMode 4、Cleaning powerup and channel switching without interference to others 5、PWM channel changes and PitMode setting 6、Support external OSD and NTSC/PAL switch 7、Miniature and light weight design <div class="wang-edit-text">EWRF E7082TM Receiver Transmitter Module 5V BEC Audio Video 5.8G 48CH 25mW/100mW/200mW Features: n Adjustable 4 modes:25mW/100mW/200mW/OFF n 700VTL camera, 120degree field of view n Betaflight/Cleanflight OSD setting of power,bands,channels and PitMode n Clean powerup and channel switching without interference to others n PWM channel changes and PitMode setting n Support external OSD and NTSC/PAL switch n Miniature and light weight design Specifications Model: EWRF 7082VTA1S Frequency: 5.8G 48CH Transmitting Power:25mW/100mW/200mW/OFF(Pitmode) Power supply:DC 6-25V(1S) Supply current:95mA(25mW)/130mA(100mW)/175mA(200mW) Resolution:PAL 720x540/NTSC 640x480 Angle of view: H 120 degree, V 110 degree Antenna: Exclusive Dipole Whip Weight:4 g Dimension:28*18.3*5.5 mm &nbsp; User Guide: 1. Setting After power on, the digital display shows the following three parameters in turn: channel, band and power.Press and hold the button until the red dot appears on the right bottom of the digital display, which can be entered into the parameters setting. When the digital display shows the Arabic numerals for the channel (1-8),press the button can select the channels. Press and hold the button again,the digital display will shows the alphabet for band(A-b-c-d-E-F), press the button can select the bands. Press and hold the button again,the digital display will shows the indication for power(H:200mW,U:100mWmL:25mW,OFF), press the button can select the power. Finally, press and hold the button,the red dot on the right bottom of the digital display will disappear.VTX is back to normal working state and the channel,band,power will display in turn on the digital display. 2. PWM/OSD setting When PWM port is connected with a RC receiver, it can been used to change AV channels 1-8 and to shut transmitting by a RC( PITMODE in effect). Make sure that there is a PWM signal from receiver within 3 seconds after powering up ,otherwise the transmitter is back to button-press setting mode . When in the setting mode of PWM, the red dot on the digital display will glow. For Betaflight/Cleanflight OSD setting of power,bands,channels and Pitmode ,please referring to EWRF 5.8G AV TX OSD Setting for details. Frequency(Mhz) &nbsp; Note: 1.Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst. 2. Please install the antenna before powering up for a longer use life. 3. .The maximum current of output DC 5V is 300mA. <style> .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }</style></div> Satisfaction - Our customers are our top priority. If you find any product problems after receiving the goods, such as damage and incorrect quantity of goods, please contact the seller immediately. We try our best to provide you with satisfactoryaftersalesservice</br>