1. This product uses the ESP32-S3R8 chip, supports 2.4GHz Wi-Fi and BLE 5 Bluetooth functions, and has built-in large-capacity Flash and PSRAM 2. Equipped with a 2.41-inch high-definition AMOLED display, it can run GUI programs such as LVGL smoothly 3. Onboard , IMU, Micro-SD card slot and lithium battery charging function, rich peripheral resources, and reserved USB, UART, I2C and 34PIN GPIO interfaces, providing flexible expansion capabilities, it is an ideal choice for rapid development of HMI applications based on ESP32-S3 4.Explore the capabilities of the ESP32-S3 Development Board, featuring a high-resolution 2.41-inch AMOLED touch display with a 600x450 pixel resolution 5.This board is powered by a 32-bit LX7 dual-core processor, providing robust performance for all your development needs Display panel: AMOLED Display size: 2.41 inches Display resolution: 600 x 450 Display color: 16.7M Display brightness: 800cd/m² Contrast ratio: 100000:1 Communication interface: QSPI Driver IC: RM690B0 Touch: Supported Touch IC: FT6336 Due to different batches, there may be differences in product appearance, color, and printed text, which not affect the use. Color: As shown Material: Plastic+LED Package Contents: 1 x Touchscreen Display Development Board Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.