Waste oil burner for cooking and heating with durable stainless steel construction Waste oil burner for cooking and heating with durable stainless steel constructionWaste Oil Burner Old Motor Oil Stove Cooking Heating Furnace Burning Tool This product is a new design of waste oil burning tool, with high pressure electric blower, which can make waste engine oil get fully burned. The experiment proves that when the waste oil is ignited, it takes only 3 minutes to boil 1 kg of water. It will help you make full use of used engine oil for heating, cooking, etc. Material: galvanized steel (The furnace will turn red after high temperature combustion, but it will not affect the use) Blower Input Voltage: 5-12V Instructions: 1. Prepare a bucket for waste oil by yourself and install the valve at the outlet. 2. Open the valve, let the oil flow into the burning furnace to a depth of 1 cm and then close the valve. 3. Ignite some flammable paper and put it into the furnace for full combustion. 4. Turn on the blower and wait for the waste oil to burn up gradually, adjust the air intake according to the fire speed. 5. Open the oil inlet valve and enter the combustion state, the fire will gradually increase. The furnace will burn better as the temperature rises.