DSO138 Oscilloscope Digital Assembled TFT with Probe Alligator Test Clip for Arduino ARM Detection D 25-26

₺1.399,00
ÜCRETSİZ Kargo

DSO138 Oscilloscope Digital Assembled TFT with Probe Alligator Test Clip for Arduino ARM Detection D 25-26

  • Marka: Unbranded

DSO138 Oscilloscope Digital Assembled TFT with Probe Alligator Test Clip for Arduino ARM Detection D 25-26

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺2.299,00
Fiyat: ₺1.399,00
Kazancınız: ₺900,00 (39%)
Satıcı:
₺1.399,00
ÜCRETSİZ Kargo

Stokta var

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

DSO138 Oscilloscope Digital Assembled TFT with Probe Alligator Test Clip for Arduino ARM Detection D 25-26

This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board. Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, With automatic, regular and one-shot modes, easy to capture the moment waveform. Comes 1Hz or 3.3V square wave test signal source. With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX. or MIN. or AVG. or Peak- Maximum real-time sampling rate: 1Msps Accuracy: 12Bit Sample buffer depth: 1024 bytes Analog Bandwidth: 0 - 200KHz Vertical Sensitivity: 10mV or Div - 5V or Div (in 1-2-5 increments) Adjustable vertical displacement with indication Input impedance: 1MΩ Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe) Coupling methods include DC or AC or GND Horizontal time base range: 10μs or Div - 50s or Div (in 1-2-5 increments) With automatic, conventional and single trigger modes, it is convenient to capture instantaneous waveforms Trigger with rising or falling edge Adjustable trigger level position with indication Waveform before trigger can be observed (negative delay) Waveform display can be freeze at any time (HOLD function) Comes with 1KHz or 3.3V square wave test signal source Digital display with waveform parameters, the parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, RMS Save or recall the waveform, the waveform does not disappear when power off Colour:Red Material:ABS Size:18 x 12.5 x 3cm Package Contents: 1 x DSO138 DIY Digital Oscilloscope Kit 1 x Probe Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different f Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo Kimliği: 445967718-936504096
  • EAN: 7438599604249

Teslimat ve İade

2 gün içinde kargoya verilir

  • STANDARD: ÜCRETSİZ - Arasında teslimat Pzt 22 Aralık 2025–Pzt 29 Aralık 2025 - ÜCRETSİZ

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei Zheshuo Technology Co., Ltd.
  • Hefei City, Anhui Province, Shushan District, Anhui Province, No. 15, South Seventh Street, South Cooperative South Road, Chemical Machinery Community, Building 1, Unit 2, 603
  • Hefei
  • CN
  • 523011
  • nacufalacan81@hotmail.com
  • 13243801962

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • France
  • 75004
  • infoapexchen@gmail.com
  • 33745713901