Wireless Light Controller LED DMX512 Transceiver Circuit Board Modules Description: Small size, easy to fit into the interior lighting available. Single button to operate, three-color LED display. The transmitting of standard DMX512 protocol data of the controller can also transmit DMX512 lighting and lighting protocol data. 126 channels automatically jump frequency, high anti-interference capability for reliable operation. Possibility to set 7 groups of identification codes, the user can use 7 groups of individual wireless systems without any mutual interference in . Specification: Input Voltage: 5VDC Operating frequency section: ISM band, frequency section 126 channels Maximum transmitting power: 20dBm Receiver Sensitivity: -94dBm Signal port: RS485 serial port or processor. User manual: Identification code and corresponding color correlation of LED diode: 1: RED 2:GREEN 3: GREED YELLOW 4:BLUE 5:RED 6: BLUE 7: GREED WHITE Press the key 1 time to indicate the ID setting, press again to , and then the ID value by adding 1 za each time by pressing. Working conditions: The LED diode shines with continuous light: no DMX or wireless signal. Red LED LED: broadcasting. Green LED LED: receiving Radio Frequency - - - 2. 400-2. 525 G, a total of 126 channels, searches automatically. Identification code - - - - Group identification code "1-7", press the "key" button to set, can only work under the same ID and receiver. Establishing communication: Turn on the DMX512 wireless receiving and transmitted card. Press the “Key” button to set the same ID value for the card being transmitted and received, use a different ID value if you need to use more than 1 wireless group at the same time. The red LED flashes when DMX data is transmitted through an undisturbed frequency section, and then the receiver changes the frequency section being communicated. The green LED flashes until the corrected ID value is received, the LED flashes faster when the DMX data is received faster. Communication was then established correctly. The package includes: 1 x PCB DMX512 wireless module