Welcome to my shop! 3M VHB 5952 double-sided tape is widely used for assembling electronic products and fastening exterior parts to vehicles, such as spoilers, trim strips, door sill protectors, bumper strips, corner guards, wheel arches, rear guards, metal panels, window slats, vent visors, and emblems. It is also ideal for home and office applications, including mounting LED light strips, nameplates, address labels, signs, mirrors, hooks, picture frames, and power strips. This tape is waterproof, resistant to solvents and high temperatures, ensuring durable adhesion in wet environments like bathrooms and in outdoor conditions. It performs well on smooth surfaces such as glass, marble, plastic, PVC, ceramic tiles, wood, and metal. It can be used as an alternative to rivets, screws, spot welds, and liquid adhesives. When removed, it leaves no residue, reducing cleanup effort and protecting surfaces. Size: 2 cm wide, 3 m long, with a thickness of 1.1 mm per layer. Ultra-resistant and super tough, the 1.1 mm thickness provides strong bonding strength. Waterproof and heat resistant, it maintains adhesion under humid and high-temperature conditions. Leaves no residue upon removal and does not damage surfaces. Made from acrylic foam, it offers excellent strength and flexibility. For optimal results, apply to a smooth, clean, and dry surface. The recommended application temperature range is 16–40°C. If the temperature is below 10°C, the adhesive may harden and bond poorly. It is advised to warm the tape with a hot air gun or hair dryer before application to activate the adhesive for best performance. Features: Strong adhesion on non-structural bonds across various materials. Waterproof, solvent resistant, heat resistant, bonds well to curved and uneven surfaces, fills gaps effectively, and adheres reliably to different substrates. Note: This double-sided tape requires time and pressure to reach full bond strength. Press firmly after application, then remove the red liner.