Features: Design products adopting magnet repulsion instead of springs, safe and reliable The flows switch has high sensitivity and long service life When water flows is larger than 0.75L/min, it will output Inlet and outlet threads are both G1″ standard threads, fit for most connectionsWide Use: Widely used in the instantaneous electric water heaters, can save electricity power Notice: 1.Actual color may be slightly different from the imge due to different light effect 2.Please allow 1-3cm deviation due to manual measurement Description: Inlet/Outlet Thread: G1″ DN15 Ambient Temperature: 1°C Operating Temperature: 120°C Min. Start Flows: 0.75L/min Max-Flows: 5L/min Rated Working Pressure: 0.65MPa MaxC-Pressure on Shell: 1.5MPa Signal Output Load: DC24V/1A, AC36V/1A, AC220V/0.1A Note: 1, Ambient temperature should not less than 0°C. Do not knock shell. Keep it away from magnetic objects. 2, Output signal is on-off output, so please make sure the connection method of controlled objects is on-off control. 3, Power of controlled objects should not exceed signal load capacity 4, This product is only used for water, not suitable for other fluids. Package List: 1c G1″ DN25 Magnetic Stainless Steel Flows Switch