Features<br> 1、Mainly used for bonding various dental orthodontic accessories.<br> 2、Easy to use, less waste, independent operation and other advantages.<br> 3、Has high clinical bond strength, high efficiency and convneient to use.<br> 4、Wonderful new - generation enamel adhesive resin, complete accessory.<br> 5、There are 2 different types available, you can choose by your needs.<br> Specification<br> Condition: New<br> Item Type: Orthodontic Dental Adhesive<br> Optional Type: Large Set, Small Set<br> Material: Plastic<br> Service Life: 18 Months<br> Storage Condition: Keep below 25℃ (do not freeze)<br> Suitable for: All kinds of dental orthodontic attachment adhesion<br> Main Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2<br> Usage:<br> 1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.<br> 2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.<br> 3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).<br> 4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.<br> Glue the bracket and the tooth surface immediately after applying the paste.<br> Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.<br> Remove excess liquid and paste after 40-60 seconds.<br> After curing for 5 minutes, orthodontic operation can be performed<br> Package List<br> 3 x Paste 3.5g<br> 1 x Etching Agent 2.5ml<br> 1 x Liquid Agent 8ml<br> 20 x Brush Head<br> 1 x Needles<br> 3 x Mixing Pen